If you’re looking for an inexpensive and easy way to update the look of your home, simple steps for replacing old tiling is a great option. While it may seem like a daunting task, it can be done in just five simple steps – all of which can be completed by even the most novice DIYer. Let’s take a look at how to make this project go smoothly and save you time and money.
1. Measure the area you want to tile
2. Purchase the necessary materials and tools
3. Remove any existing tiles
4. Install new tiles, making sure they are properly sealed and grouted
5. Clean up the area and admire your work!
Step 1
Gather the Supplies You Will Need. Before you begin, make sure that you have all of the necessary supplies on hand so that you don’t have any surprises along the way. You will need tile adhesive or mastic, grout, tiling tools such as a notched trowel and grout float, spacers, a level, a wet saw or tile cutter (depending on what kind of tile you are using), rubber gloves, eye protection, and a dust mask. Once you have these supplies gathered together, you are ready to get started.

Step 2
Remove Your Old Tile. This is the most labor-intensive step of the process but also one of the most important. Use either a chisel and hammer or an oscillating tool to carefully remove your old tile from its substrate; always wear protective gear such as gloves and goggles when doing this step. Make sure that all of the old adhesives are removed as well; if there is any remaining adhesive on the surface it will interfere with proper adhesion when laying down new tiles.

Step 3
Prepare Your Substrate Base. After you have removed all of the old tiles and cleaned up any residual pieces or dust left behind, it’s time to prepare your substrate base for the installation of new tiles. Make sure that your substrate base is level by using a long level across several spots; use shims if needed to get everything nice and level before proceeding with the installation of your new tiles.

Step 4
Begin Installing New Tiles & Grouting them Together. Now comes perhaps one of the most fun parts – installing your new tiles! Follow manufacturer instructions for application when it comes to applying either mastic or thin-set mortar for adhesion purposes; apply small amounts at first before working your way up to larger areas once comfortable with the technique used for spreading adhesive onto the back side of tiles being installed. Once all new tiles are installed properly, grout them together using non-sanded grout following the manufacturer’s directions for best results; allow sufficient drying time before polishing off excess grout residue with a wet sponge/rag cloth combination dipped in a water bucket prior to mopping the floor clean after completion process finalized per instructions provided in Step 5 below accordingly!


Step 5
Cleanup & Finishing Touches. The final step involves cleaning up any remaining mess created during the installation process while also making the finishing touches needed prior to enjoying the newly renovated space! Start by sweeping away any loose dirt/debris left behind while also wiping down walls/counters where applicable if needed – then mop the entire area once more using dampened mop cloth dipped into a bucket filled generously with warm soapy water solution afterward! Lastly, apply sealant products recommended by product manufacturers directly onto newly installed tiling surfaces according to the instructions given as the last bit of maintenance effort is required prior to enjoying the updated space fully!

What Supplies Are Needed simple steps For Replacing Old Tiling?
Supplies needed include the tile of choice, tile adhesive (depending on the type of tile you are using), rubber gloves, eye protection, and a dust mask.
Is It Difficult To Replace Old Tiling?
No, with just some patience and dedication anyone can complete the project successfully.
How do I prepare the substrate base for the installation of new tiles?
Make sure that your substrate base is level by using a long level across several spots; use shims if needed to get everything nice and level before proceeding with the installation of new tiles.
Which kind of grout should be used when installing tiles?
Non-sanded grout should be used when installing tiles following the manufacturer’s directions for best results.
What sort of maintenance is required after finishing up the project?
Apply sealant products recommended by product manufacturers directly onto newly installed tiling surfaces according to followed instructions given as the last bit of maintenance effort is required prior to enjoying the updated space fully!